New Sloan Cold Door IV LED – 7ft. LED Cooler Light – Center Unit – 4000K / 5000K – Refrigerator Display Case Light
$122.00
The New Cold Door 4 LED lighting system provides crisp, uniform illumination across doors for walk-in coolers/freezers, and remote glass door reach-ins. Highly adaptable for varying case styles and shelf depths, this complete suite of options includes 4000 K and 5000 K color temperatures, and comes in lengths for 4, 5, 6, and 7-foot doors.
- Description
- General Information
- System Parts
- Installation Accessories
- safety precautions
- Reviews (0)
Description
The New Cold Door 4 LED lighting system provides crisp, uniform illumination across doors for walk-in coolers/freezers, and remote glass door reach-ins. Highly adaptable for varying case styles and shelf depths, this complete suite of options includes 4000 K and 5000 K color temperatures, and comes in lengths for 4, 5, 6, and 7-foot doors.
- Delivers bright, uniform light, vibrant color, and reduced glare to product facings at depths as shallow as 2 inches (50 mm)
- High efficacy at 109 lm/W powers up to 5-door frames on a single power supply
- Optional wing accessories conceal light source from consumers
- Up to 85% energy savings compared with typical fluorescent fixtures
General Information
- Cold Door 3 is intended for use inside commercial refrigeration cases with packaged foods only.
- Do not cut or remove existing primary wiring in cases being retrofitted.
- Cold Door 3 Retrofit Kit contains all component parts and instructions needed for a retrofit luminaire conversion.
- Complete Retrofit Kit is assembled during on-site audit of each merchandiser prior to installation.
- Cold Door 3 Retrofit Kit, may be employed as replacement panels for any UL listed commercial refrigerators and freezers door frame type.
- Prior to removing incumbent lights, verify all required Cold Door 3 inventory and recommended installation accessories are present.
- Cold Door 3 LED Luminaire should only be used with either SloanLED 100 W 24 VDC, or 40 W 24 VDC power supplies, or an approved equivalent.
System Parts
- SloanLED power supplies
- Mounting clips
- Invisibility wings
- End reflectors
- Center lights
- End lights
- PIR sensors, single or double
- Hybrid dimmer and power controllers (PWM)
- Retrofit stickers
Installation Accessories
- Solid core wire – 16-20 AWG
- Wire strippers
- Angle drill
- Self-drilling/Self-tapping screws, 3/4″ to 1″ long, hex-head or pan-head, #8 or #10
- Safety glasses or goggles
- Gloves
- UL listed wire connectors
- Wire ties
- Electrical tape
- Measuring tape
- Screwdrivers
safety precautions
- Read and observe all NOTES, CAUTIONS and WARNINGS shown throughout these instructions.
- WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of refrigerator/freezer electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- Installation to be performed by factory trained service personnel only.
- Gloves and safety glasses or goggles should be worn while performing installation.
- This product is UL listed for dry and damp locations.
- Only those open holes indicated in the photographs and/or drawings may be made or altered as a result of kit installation. Do not leave any other open holes in an enclosure of wiring or electrical components.
- Electrical specifications for highest powered luminaire: 0.700 A, 24 VDC, Class 2 circuit. Check individual product label for more details.
- WARNING – Risk of fire or electric shock. Install kit only in refrigerators/freezers that have construction features and dimensions shown in photographs and/or drawings. Input rating of retrofit kit must not exceed input rating of luminaire (case).
- RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT WHERE SUITABILITY OF COMBINATION SHALL BE DETERMINED BY UL OR AUTHORITIES HAVING JURISDICTION.
Reviews
There are no reviews yet.