Skip to main content

Selectable LED wall packs are outdoor wall-mounted fixtures with field-adjustable wattage and/or color temperature. Contractors use them on building perimeters, loading docks, alleys, walkways, and parking areas when one SKU needs to cover multiple brightness and kelvin specs.

Central Lighting Service now stocks an expanded selectable wall packs lineup from Westgate, alongside ASD, ESL Vision, and Orbit. This guide covers how commercial LED wall packs differ, which Westgate series fits which job, and which factory options matter.

What Is a Selectable Wall Pack?

A wall pack mounts to a vertical surface and throws light along the building face and adjacent pavement. A selectable (or multi-power / multi-CCT) wall pack lets you set wattage and often color temperature with switches inside the fixture after install. Typical CCT choices are 3000K, 4000K, and 5000K. Many commercial models run on 120-277V and are wet-location rated (often IP65).

Selectable wall packs reduce stocking SKUs: one catalog number can replace several fixed-watt HID or early LED wall packs on a multi-building or multi-tenant job.

New Westgate LED Wall Packs at Central Lighting Service

These Westgate series are now listed with specs, cut sheets, and factory-installed options where the hotsheet supports them:

Series Style Power / CCT Best for
WMXPRO Traditional glass lens, non-cutoff Selectable wattage and CCT (3000K-5700K) HID replacements, docks, alleys, general perimeter
WMX Traditional glass lens, non-cutoff Selectable wattage; fixed 3000K / 4000K / 5000K Same footprint jobs when CCT is locked in the spec
WPFX Flat glass lens with photocell Selectable wattage and CCT Builder / multi-family exteriors needing dusk-to-dawn
WPAX Mostly cutoff + 20% front ambient, photocell 60W / 80W / 100W selectable; CCT selectable Sites that want cutoff control with some forward fill
WMDL 14" dual-lens vandal-proof wall/ceiling 15W / 20W / 25W and 5 CCT options Impact-prone entries, corridors, and exterior walls
WMV Compact vandal-proof wall pack 20W; 3000K / 4000K / 5000K Smaller high-abuse locations
LTW 50W semi-cutoff vandal-proof 4000K, about 4400 lumens Parking edges and tough commercial exteriors
DLW Compact modern wall pack with photocell 15W; 3500K / 4000K / 5000K Architectural / light commercial accents
WPV Compact vandal-proof wall/ceiling light 12W; selectable CCT Stairs, secondary doors, small surface mounts

Browse all current models in Selectable Wall Packs or the broader Outdoor Lighting catalog.

Cutoff vs Traditional vs Vandal-Proof Wall Packs

Traditional / non-cutoff glass lens

Traditional wall packs (WMXPRO, WMX) use a prismatic glass lens with a wider forward throw. They are the closest LED match to legacy HID wall packs and suit alleys, docks, and open building faces where uplight and forward throw are acceptable.

Cutoff and semi-cutoff

Cutoff-style fixtures limit light above the horizontal and reduce glare and sky glow. Use them near property lines, dark-sky-sensitive sites, and where neighbors complain about spill. WPAX mixes mostly cutoff downlight with a controlled 20% forward ambient component. LTW is a semi-cutoff vandal-proof option.

Vandal-proof and compact architectural

Vandal-proof housings (WMDL, WMV, LTW, WPV) belong on exposed walls, schools, public housing, and high-traffic entries. Compact modern packs such as DLW fit lighter architectural exteriors when abuse resistance is less critical.

Factory Options: Photocell, Emergency Backup, and Sensors

On the Westgate pages that list factory options, you can add them as checkboxes at checkout (same Product Add-ons pattern used on our ESL wall packs):

  • Photocell (OPT-PC-B) – dusk-to-dawn control when the fixture does not already include one
  • Emergency backup (OPT-EM-*) – factory EM pack sized to the housing; cold-weather EM is a separate hotsheet path
  • Occupancy / microwave sensors – bi-level control for corridors and perimeters
  • Network sensors – Westgate or Keilton network options where listed
  • 480V conversion, shields, and tamper screws – when the project voltage or abuse level requires them

Match EM and sensor codes to the housing size you ordered. Wrong-size EM options will not fit.

How to Choose a Commercial LED Wall Pack

  1. Mounting height and throw – traditional glass lens for longer forward throw; cutoff when spill control matters
  2. Wattage band – small housings for doors and short runs; medium/large for docks and longer walls
  3. CCT – 3000K warmer, 4000K neutral commercial default, 5000K cooler security look; use multi-CCT SKUs when the owner has not locked kelvin
  4. Controls – photocell for dusk-to-dawn, sensor for occupied-only or bi-level, EM where egress or life-safety coverage is required on the fixture
  5. Abuse level – vandal-proof when the wall is exposed to impact or tampering

If you are replacing HID wall packs and want to keep the existing housing, see our LED retrofit lighting guide and the Westgate CL-FLTW flat HID retrofit lamp.

Why Buy Wall Packs from Central Lighting Service?

Central Lighting Service is a veteran-owned commercial LED supplier in Peru, Indiana. We stock manufacturer fixtures with cut sheets on each product page, ship nationwide, and help contractors and property managers match wattage, CCT, and rebate-friendly outdoor lighting. For project takeoffs, call 765-473-5204 or use our free custom lighting design request.

Selectable Wall Pack FAQ

What does selectable wattage mean on an LED wall pack?

Selectable wattage means the fixture has an internal switch (or set of switches) that changes the driver output. One SKU can ship as several lumen packages so you can set brightness on site without reordering.

What CCT should I use on a commercial wall pack?

4000K is a common commercial default for neutral white. 3000K reads warmer on building faces near residential neighbors. 5000K is cooler and often used for security-oriented perimeters. Multi-CCT models such as WMXPRO let you decide after install.

Do I need a photocell on every wall pack?

Not if the circuit is already on a lighting contactor, time clock, or building control system. Add a photocell when the fixture should switch itself dusk-to-dawn. Some series (WPFX, WPAX, DLW, WMDL) include a photocell as standard.

When should I choose a vandal-proof wall pack?

Choose vandal-proof when the fixture is within reach of impact, sports balls, carts, or intentional damage. WMDL, WMV, LTW, and WPV are built for those conditions.

Can I retrofit an existing HID wall pack instead of replacing it?

Yes, when the housing and socket are sound. Use a ballast-bypass LED retrofit lamp such as the Westgate CL-FLTW for shoebox and wall pack housings. Full fixture replacement is better when the housing is corroded, the optics are wrong, or you need cutoff or vandal-proof performance the old housing cannot provide.

Leave a Reply